MIL-PRF-5636E
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM-B117
- Standard Practice for Operating Salt Spray (Fog)
Apparatus
(ASTM documents may be obtained at https://www.astm.org/ or addressed to the American
Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA
19428-2959.)
NATIONAL AEROSPACE STANDARDS METRIC (NASM)
NASM33588
- Sampling Procedures and Tables for Inspection by
Attributes
(NASM documents may be obtained at https://www.aia-aerospace.org/ or addressed to Aerospace
Industries Association, 1000 Wilson Boulevard, Suite 1700, Arlington, VA 22209-3901.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Associated specification. The individual item requirements shall be as specified herein and
in accordance with the applicable specification sheet. In the event of any conflict between the
requirements of this specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article inspection
in accordance with 4.2.
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.4 Materials. All materials shall be corrosion resistant or suitably treated to resist corrosion due
to electrolytic decomposition, salt fog, and any other atmospheric condition that may be
encountered during operational use or storage. The use of toxic chemicals, hazardous substances,
or ozone depleting chemicals shall be avoided whenever feasible.
3.4.1 Compatibility. All materials shall be compatible with the lubricating oil specified in the
acquisition document (see 6.2). No copper or magnesium shall be used.
3.5 Interface.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business