MIL-PRF-5636E
1. SCOPE
1.1 Scope. This is a general specification for temperature regulating with surge protection
lubricating oil cooler valves, incorporating oil pressure relief bypass, for use on oil coolers using
petroleum or synthetic base lubricating oils.
1.2 Classification. Lubricating oil cooler valves (valves) will have a maximum continuous oil
flow capacity, and will be one of the following types, as specified (see 6.2):
Type I - 300 pounds per minute capacity.
Type II - 425 pounds per minute capacity.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are cited in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
these lists, document users are cautioned that they must meet the requirements specified in the documents
cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MS33786
- Fitting Installation, Flared Tube and Hose, Swivel
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.3 Non-government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited
in the solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQC-Z1.4
- Sampling Procedures and Tables for Inspection by
Attributes (DoD-adopted)
(ASQ documents may be obtained at https://www.asq.org/ or from American Society for Quality,
P.O. Box 3005, Milwaukee, WI 53201-3005 or 600 North Plankinton Avenue Milwaukee, WI
53203.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business